ASV RNC 10 Wax Based Corrosion Inhibitor 500ml
- Thin dry film provides short term corrosion protection for up
to 9 months indoor storage conditions - Ultrathin film provides mild lubrication
- Stops further rusting
- Penetrates into minutest cracks to stop further moisture
ingress - Removal of the film is not necessary
- Does not attract dirt & dust
- Description
- Brand
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Description
Product Description
ASV® RNC 10 is a thin dry waxy film type corrosion inhibitor
for providing short-term protection from rust and corrosion
for up to 9 months indoors under normal storage
conditions. It forms a light protective film over the surface
and seals out entry of moisture & corrosion. Its dry nonstaining formulation resists dirt & dust build up and is safe
for use on all metals.
ASV® RNC 10 does not contain any CFCs or any ozone
depleting substances.
Applications
Corrosion Protection for metal parts in storage,
manufacture, shipping or in service as:
Dies
Jigs
Tools
Molds
Instruments
Solenoids
Welds
Castings
Shafts
Motors
Spare Parts
Freshly Machined Surfaces
Benefits
Thin dry film provides short term corrosion protection for up
to 9 months indoor storage conditions
Ultrathin film provides mild lubrication
Stops further rusting
Penetrates into minutest cracks to stop further moisture
ingress
Removal of the film is not necessary
Does not attract dirt & dust
Directions for Use – Bulk
Apply onto clean, dry and degreased surfaces by means of
brush or by dipping components into the fluid. Ensure
removal of rust, loose scales, dirt, dust and trapped moisture
from surfaces before application. Mask areas not required to
be coated. Apply uniformly a light film for maximum
coverage. Two light films are better than a single thick film.
For thicker films, recoat only after previous coat dries. Reuse
as required.
Directions for Use – Aerosol
Shake can till bearing noise from inside is audible. Spray
liberally, a light and even film onto the surface. Spray on to
clean and degreased surface and remove dirt, rust, scales,
dust and entrapped moisture prior to application of this
product. Allow solvents to evaporate and film to dry before
recoating. Reuse as required.
Caution
Contains flammable propellant and solvents. Do not spray
near naked flame, hot surfaces or energized equipment.
Use with adequate ventilation.
and using for industrial materials and like
Brand
ASV
Additional information
| Weight | 0.55 kg |
|---|
Be the first to review “ASV RNC 10 Wax Based Corrosion Inhibitor 500ml”
Vendor Information
- Vendor: Muhammad Habshi
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.