Rustocon Rust Converter

0 out of 5

( There are no reviews yet. )

Exclusive of VAT

Category: Surface and Anti Corrosion Coating ART NO:
IMPA CODE:
ISSA CODE:

Add to wishlist

Description

Rustocon converts rust itself into protective coating

Description :

Large structural painting jobs in various heavy engineering industries and projects especially in coastal areas involve the cumbersome rust removal by sand/shot blasting, wire brushing or mechanical grinding etc., prior to painting.

Rustocon is a single pack ready to use solution which on application converts the Rust and acts as a coating preventing further corrosion and also acts as an ideal base for painting. Rustocon prevents the steel from further rusting for a reasonable period of time without any paint coat on it. ( around 3 – 4 months stored in room ) Rustocon reacts with all the layers & forms a stable non-reactive complex organo-metallic surface having BLUISH-BLACK COLOUR. It stops the migration of ions, preventing the electro-chemical corrosion process and hence prolonging the life of paint system which result in considerable savings.

Usage Insructions :

1) In case of corroded M.S. Surface, first remove the loose rust scales by mechanical means like wire brushing, chipping etc.

2) Ensure that the surface to be treated with Rustocon is free from oil, grease, paint coat etc. Then , apply Rustocon properly with brush, spray or by dipping.

3) Leave the surface as it is at least for 48 hours to ensure the complete reaction of Rustocon with rust and best paint adhesion.Then surface is prepared to receive any type of further coat.

Typical Application Area :

Overhead water tanks, heavy structural steel tankers (road & sea), drilling rigs, chemical process equipment & storage tanks, tube & pipe stock, conveyors, cranes, bridges, pipelines, concrete reinforcements, automobile dickeys etc. and practically all types of industries where problem of rusting of Iron is present.