CALLINGTON S-Weld Clean Pickling Gel -2.5 Kg

CALLINGTON S-Weld Clean Pickling Gel -2.5 Kg

جل التنظيف من كالينجتون اس ويلد – 2.5 كجم
إنه جل مؤكسد قوي لتخميل المنتجات المصنوعة من الفولاذ المقاوم للصدأ.
يمكن استخدامه بعد التخليل أو الطحن أو التلميع الميكانيكي للفولاذ المقاوم للصدأ لضمان الحصول على سطح سلبي قبل التثبيت أو تشغيل المنتج النهائي.

Exclusive of VAT
SKU: 073-0001 Category: ART NO:


CALLINGTON S-Weld Clean Pickling Gel – 2.5 Kg

S-Weld Passivator is a powerful oxidising gel for the passivation of stainless steel fabricated products.
S-Weld Passivator can be used following pickling , grinding or mechanical polishing of stainless steel to ensure a passive surface is obtained prior to installation or commissioning of the final product.


  • Gel consistency for ease of application
  • Enhancement of chrome oxide corrosion resistant (passive) layer
  • Dissolves any residual surface contamination
  • Improved quality of fabricated product
  • Effectively removes free iron
  • Is a strong ASTM A380 compliant formulation
  • Provides fast acting, one step descaling
  • Completely water soluble
  • Supplied with application brush
  • A thick adhesion gel
1. Clean the area to be treated with a solvent cleaner such as Callington Prosol or equivalent.
2. Stir the gel to ensure a smooth consistency and apply S-Weld Passivator using the acid resistant brush provided.
3. Leave the gel on the surface for 1 to 6 hours depending in the grade of stainless steel to be treated and the nature of the environment for which the  fabricated item will be subjected.
4. To remove the gel, rinse thoroughly with water or Callington S-Weld Neutralizer, neutralising solution.

Note :
1. Wear PVC gloves, goggles, overalls and safety boots. Wear a respirator if working in a confined or poorly ventilated area.
2. Avoid spillages and do not allow gel to come in contact with the body or eyes. Avoid breathing vapour.
3. If skin contact occurs, immediately flush body and / or clothes with water. Remove all contaminated clothing.
4. Replace the lid on the container tightly after use, and store upright in a cool dry area away from direct sunlight. Do not store or use below 5oC

Caution: This product contains Nitric Acid and is corrosive and poisonous.
Wear appropriate chemical protective clothing, eye protection and breathing apparatus as necessary.
Do not use S-Weld Passivator near open flames or cutting torches, since hazardous flammable gas can be generated. Keep lid tightly closed when not in use, and out of reach of children or unauthorized users.
If using in a poorly ventilated area, use a respirator.
If you require to neutralise the acidic waste residue; this can be done using S-Weld Neutralizer neutralising solution. Add using S-Weld Neutralizer until the colour changes to a pale pink colour.
Refer to the Callington Haven S-Weld Passivator Material Safety Data Sheet for further safety information. A copy of the Material Safety Data Sheet can be obtained on request from our office.



All statements, information and data presented herein are believed to be accuracy and reliable but are not to be taken as a guarantee, expressed or implied, for which seller assumes legal responsibility and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use if free of patent infringement and are not recommendations to infringe on any patent.





Additional information

Weight 3 kg


Filter by Temperature

High Temperature


There are no reviews yet.

Be the first to review “CALLINGTON S-Weld Clean Pickling Gel -2.5 Kg”

Vendor Information

  • j-b weld TANKWELD™ EPOXY PUTTY – 1 OZ

    0 out of 5
  • VK JELLY Stainless Steel Pickling Gel Cleaner 1kg

    0 out of 5

    0 out of 5
  • Liqui-Moly Cera Tec ceramic wear protection,300 ml (Made in Germany)

    0 out of 5

You may also like…

You've just added this product to the cart: