ASV FM MULTI 5 Multipurpose Spray For Food Processing Machinery Spray
- NSF H-1 Registration Certificate # 162681
- Multifunctional formula lubricates all sliding and moving
parts with a long lasting thin oily lubricating film - Rapidly penetrates minute cracks and pores to displace
trapped moisture - Penetrates deeply through rust to loosen scale and
corroded or frozen parts - Leaves a thin, long lasting film, film to prevent formation
of rust or corrosion - Cleans & removes oils, greases and other light
- Description
- Brand
- Additional information
- Reviews (0)
- Support Documents
- Vendor Info
- More Products
Description
Product Description
ASV® FM Multi 5 Spray is a fast acting industrial grade lubricant, cleaner, rust penetrant and protector. It forms a clear thin non-drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion. Its unique low surface tension formula rapidly attacks rust to free seized or frozen components. It is non-conductive, non-staining and offers complete protection to metal surfaces.
ASV® FM Multi 5 Spray does not contain any silicones, ozone depleting chemicals, CFC’s or harmful chlorinated solvents and is safe for use on around all metals, plastics, rubbers and other industrial finishes.
Benefits:
NSF H-1 Registration Certificate # 162681
Multifunctional formula lubricates all sliding and moving parts with a long lasting thin oily lubricating film
Rapidly penetrates minute cracks and pores to displace trapped moisture
Penetrates deeply through rust to loosen scale and corroded or frozen parts Leaves a thin, long lasting film, film to prevent formation of rust or corrosion
Cleans & removes oils, greases and other light contaminants
Provides greaseless, non-staining, silicone free lubrication and protection
Contains safe non-flammable CO2 propellant 360° Valve allows product to be sprayed in any position, even inverted
Directions for Use:
For rust penetration, spray liberally onto the surface. Allow
solvents to penetrate and free rusted parts. Period for
penetration may vary depending upon the length of time the
product has been rusted for and in some cases may even take
up to hours. Use an absorbent rag or a brush to remove dirt,
rust, scales & dust. For lubrication, spray lightly and evenly
over surface area to be lubricated. For moisture displacement,
spray until clear product comes out and emulsified residue is
totally clear. For metal protection, spray liberally and do not
wipe off protective film from the surface.
Caution:
Contains flammable solvents. Do not spray near
naked flame, hot surfaces or energized equipment. Use with
adequate ventilation.
Brand
ASV
Additional information
| Weight | 0.55 kg |
|---|
Be the first to review “ASV FM MULTI 5 Multipurpose Spray For Food Processing Machinery Spray”
Vendor Information
- Vendor: Muhammad Habshi
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.