ASV KL 250 Synthetic Chain Oil For High Temperatures 1 Liter


ASV KL 250 Synthetic Chain Oil For High Temperatures 

Non-Carbonizing Synthetic Oil For Lubrication of Chains Operating At High Temperatures




High speed tenter frames in textile industry, glass works, paint booths, automotive assembly lines, varnish curing booths, open chains in industry, steel plants, paper and plywood manufacturing units, ceramic processing plants, latex manufacturing plants, lubrication of all chains, clips, bearings.


Directions for Use

Use as supplied. Never dilute or mix with other oil or grease. For optimal lubrication and adhesion, clean and degrease the surface of all previous residues, lubricants, or contaminants. Apply to clean surface by regular oiling methods i.e., by brushing, spraying, dipping or drop feed oiling mechanisms. Allow time for lubricant to penetrate and excess lubricant to drip off before restarting operations. For new chains: Thoroughly clean prior to applying this lubricant. It is recommended to keep new chains dipped in the lubricant for 30 minutes to ensure complete penetration to all innermost points. Avoid excessive use. Use as per instructions laid down in manufacturers manual. Replace cap after use.



ايه اس في


There are no reviews yet.

Be the first to review “ASV KL 250 Synthetic Chain Oil For High Temperatures 1 Liter”

Vendor Information

  • Vendor: admin
  • Address:
  • No ratings found yet!
You've just added this product to the cart: