Our Brands

WEICONLOCK AN 302-43 Threadlocking

Product Category: 
Threadlocking-Gaketing & Retaining
Stock: 
12.00
Content Size: 
50 
Milli Liter (ml)

WEICONLOCK AN 302-43 Threadlocking

  • higher viscosity
  • medium strength
  • disassembly with normal tools

Threadlocking, DVGW-approval, KTW approval for drinking water sector, marking-free

Processing

WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). For sealing applications, apply WEICONLOCK in circular motions on the thread. Assemble and tighten parts. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.

Storage WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid.

Safety and health

When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed.

-+