- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
PRODUCT DESCRIPTION :
B243 is an anaerobic formulation designed to be used on parts in an “as received” condition, such as those with protective films (oils) etc.
B243 is designed for direct application onto as received parts where a light oily film exists or where contamination from surrounding parts is a problem.
INSTRUCTIONS FOR USE:
- Where possible remove thick deposits of grease or dirt.
- Apply adhesive to threads and assemble parts.
- Parts should be left for 15 minutes to reach handling strength working strength 1 hour
- B7471 (Standard) or B7649 (Fast) Activators can be used, however 30% strength loss can occur when using accelerators.
Use as a conventional medium strength locker on cleaned parts with strengths up to 12N/mm (2) or as a convenient all-purpose locker on oily parts with 810mm (2) typical strength depending on oil type and film.
|Filter by Deassemble||
Normal with Normal Tools
- Vendor: Muhammad Habshi
- No ratings found yet!