WEICONLOCK® AN 306-41 Retaining Cylindrical Assemblies
Exclusive of VAT
- Description
- Brand
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Description
- medium viscositymedium strengthdisassembly with normal toolsRetaining cylindrical assemblies for bearings, shafts and bushings, marking-freeSurface pre-treatmentIn general, WEICONLOCK does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be toleratedHowever, best results will be achieved on cleaned, degreased parts (use WEICON Surface Cleaner). If required, the parts should be slightly roughened.ProcessingWEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). On press fitted parts and larger cylindrical assemblies a thin and uniform layer should be applied on both surfaces. Join parts quickly. For sliding seats, turn the parts against each other when joining for an optimal distribution of the adhesive. Joint parts should not be moved until handling strength is reached. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.
Storage
WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid.
Brand
WEICON
فايكون
Additional information
| Weight | 0.30 kg |
|---|---|
| Filter by viscosity | Medium |
| Strength | Medium |
| Filter by Deassemble | Normal with Normal Tools |
| Color | Yellow |
Be the first to review “WEICONLOCK® AN 306-41 Retaining Cylindrical Assemblies”
Vendor Information
- Vendor: Muhammad Habshi
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.