WEICON LOCK PEN SYSTEM AN 302-62 , 50 ml
- Higher viscosity strong hard to disassemble
- Temperature resistance -60 to +150 °C
- Final strength (100%) after 3 – 6 h
- Description
- Brand
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Description
- higher viscosity stronghard to disassembleThreadlockingColour
redFor threaded joints up to
M 36Viscosity at +25°C (+77°F) according to Brookfield
1.500 – 6.500 mt mPa·sMax. gap bridging
0,25 mmPrevailing stregth
40 – 55 NmShear strength Nmm² (DIN 54452)
10 – 15 N/mm²Handling strength at room temperature
10 – 20 min.Final strength (100%) after
3 – 6 hTemperature resistance
-60 to +150 °C*Strength values based on M 10 screws, 8.8 grade, thickness of nut 0,8.d Static shear strength based on cylindrical parts of abt. Ø 13 mm, tolerance (D-d) = 0,05 mm, l/d = 0,88
Surface pre-treatment In general, WEICONLOCK does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on cleaned, degreased parts (use WEICON Surface Cleaner). If required, the parts should be slightly roughened.
Processing
WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). For sealing applications, apply WEICONLOCK in circular motions on the thread. Assemble and tighten parts. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.
Storage
WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid.
Safety and health
When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed.
Brand
WEICON
Additional information
| Weight | 0.3 kg |
|---|---|
| Filter by viscosity | High |
| Filter by Deassemble | Hard with normal tools |
| Color | Red |
Be the first to review “WEICON LOCK PEN SYSTEM AN 302-62 , 50 ml”
Vendor Information
- Vendor: Muhammad Habshi
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.