WEICON LOCK PEN SYSTEM AN 305-18 , 50 ml

WEICON LOCK PEN SYSTEM AN 305-18 , 50 ml

  • high viscosityhigh strengthhard to disassemble
  • Flange sealing for filling large gaps immediate sealing effect,
  • high temperature resistantColour
    redViscosity at +25°C (+77°F) according to Brookfield
    80.000 – 500.000 ht mPa·s
Exclusive of VAT
Availability: 5 in stock Category: ART NO:
IMPA CODE:
ISSA CODE:
Add to Quote

Description

  • high viscosityhigh strengthhard to disassemble
  • Flange sealing for filling large gaps immediate sealing effect,
  • high temperature resistantColour
    redViscosity at +25°C (+77°F) according to Brookfield
    80.000 – 500.000 ht mPa·sMax. gap bridging
    0,5 mm

    Breakaway strength (Thread)
    12 – 18 Nm

    Prevailing stregth
    18 – 24 Nm

    Shear strength Nmm² (DIN 54452)
    8 – 13 N/mm²

    Handling strength at room temperature
    10 – 20 min.

    Final strength (100%) after
    3 – 6 h

    Temperature resistance
    -60 to +200 °C

    *Strength values based on M 10 screws, 8.8 grade, thickness of nut 0,8.d Static shear strength based on cylindrical parts of abt. Ø 13 mm, tolerance (D-d) = 0,05 mm, l/d = 0,88

    Surface pre-treatment

    In general, WEICONLOCK does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on cleaned, degreased parts (use WEICON Surface Cleaner). If required, the parts should be slightly roughened.

    Processing

    WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). Apply continuous bead on one side of flange, join and tighten parts quickly. For sealing applications (pipe fitting) apply WEICONLOCK in circular motions on the thread. Screw pipe threads together and tighten until desired orientation. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.

    Storage

    WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid.

    Safety and health

    When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed.

Brand

WEICON

فايكون

Additional information

Filter by viscosity

High

Strength

High

Filter by Deassemble

Hard with normal tools

Filter by Temperature

High Temperature

Color

Red

Reviews

There are no reviews yet.


Be the first to review “WEICON LOCK PEN SYSTEM AN 305-18 , 50 ml”

Vendor Information

  • Vendor: admin
  • Address:
  • No ratings found yet!
You've just added this product to the cart: