ABRO Epoxy Steel 4 Min Kwik-Set (MADE IN U.S.A) – 57 G
ايبوكسي لاصق متعدد الاستخدام لجميع المواد والمعادن
- Description
- Brand
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Description
EPOXY Clear 4 MINUTE
KWIK-SET AUTOMOTIVE GRADE
• Non-Yellowing, Resists Water and Most Solvents
• Ideal for Automotive, Hobby or Home Use
FEATURES :
- Bonds: Aluminum, Steel, Brass, Bronze, Metal
- Tensile Strength: 3000 psi
- Color: Gray
- Water Resistant
- Handling Time: 4 Minutes
- Set Time: 10 Minutes
- Cure Time: 24 Hours
- Temperature Range: 221˚F (continuous) -300˚F (intermittent)
- Non-Flammable
- Chemical Resistant: Most automotive fluids
- Part No.: 44209
- Package: 2 oz. (56.7g) tubes, carded
- Units Per Case: 12
TIPS & TRICKS :
- Equal portions of the hardener and resin must be thoroughly mixed together in order for this product to cure properly.
- Only mix the amount of hardener and resin that can be used within the handling time.
- Removable tape is good for putting on areas that you do not want epoxy to get on. Before the epoxy cures, remove the tape.
Brand
ABRO
ابرو
Additional information
| Weight | 0.2 kg |
|---|
Be the first to review “ABRO Epoxy Steel 4 Min Kwik-Set (MADE IN U.S.A) – 57 G”
Vendor Information
- Vendor: Muhammad Habshi
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.