WEICON Anti-Friction Spray MoS2, 400ml
- High portion of MoS2 provides clean sliding lubrication
- Excellent emergency running properties and reduces running noises
- Can be used on sliding and running rails and guides, conveyor belts, transport rollers and slides
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Anti-Friction Spray MoS2 is a grease-free dry lubricant with pressure and temperature resistance from -185°C (-301°F) to +400°C (752°F). The layer repels dust, dirt and water, resists oils, greases and many chemicals and adheres to metals, plastics and wood surfaces.
The high portion of MoS2 provides clean sliding lubrication, reduces friction, has excellent emergency running properties and reduces running noises.
WEICON Anti-Friction Spray MoS2 shortens and improves the slide-in conditions for sliding bearings, gearings and other slide pairings, particularly at high pressure load and low sliding speed.
WEICON Anti-Friction Spray MoS2 can be used on sliding and running rails and guides, conveyor belts, transport rollers and slides, as a coating for cutting, on loading technology products, as a substitute for release agents containing silicone, and wherever oil or grease lubrication is not permitted or desired.
Clean and degrease surfaces prior to application (e. g. WEICON Surface Cleaner). Shake can until rattle of mixing ball is heard. Spray on cleaned and dry surfaces from about 20 cm distance. In case of continued use, shake can again from time to time. At room temperature (+20°C/+68°F), the coating is dust-dry approx. 15 minutes after spraying.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding +50°C.
Safety and health
When using WEICON products, the physical, safety technical, toxicological and ecological data and regulations in our EC safety data sheets (www.weicon.com) must be observed.
|Filter by Temperature||
- Vendor: Muhammad Habshi
- No ratings found yet!