>

ASV CS 81 ODC Free Metal Surfaces & Parts Cleaner 500ml

ASV CS 81 ODC Free Metal Surfaces & Parts Cleaner 500ml

  •  Removes grease, oil, dirt, dust, sludge
  •  Non corrosive, nonconductive & non staining
  •  Removes tar, adhesives and other tough contaminants
  •  Leaves no residue
  •  Safe on metals, most plastics, glass and ceramics
  •  Non chlorinated formulation
Exclusive of VAT
SKU: ASV CS81-S5 Categories: , ART NO:
IMPA CODE:
ISSA CODE:

Description

ASV CS 81 ODC Free Metal Surfaces & Parts Cleaner 500ml

Fast Evaporating, Residue Free, Cleaner / Degreaser for Fast Removal of Contaminants from Metal Surfaces; Free of Chlorinated Solvents

Product Description

ASV® CS 81 is a non-chlorinated, fast drying cleaner / degreaser for mechanical cleaning applications as an alternative for chlorinated solvents like CTC, 1,1,1 Trichloroethane. Safety standards from both, worker health as well as environmental, prohibit the use of chlorinated solvents like CTC or 1,1,1 TCE.

ASV® CS 81 rapidly penetrates through grease, oil, dirt, dust, and other contaminants and cleans equipment fast. It has a pleasant citrus odor, fast evaporation rate and does not leave any residue.

ASV® CS 81 cleans metal surfaces effectively due its superior penetrating and wetting ability. It does not contain any CFC’s, chlorinated solvents or ozone depleting chemicals and is suitable for cleaning degreasing of all metal surfaces and equipment only.

Applications

For heavy duty cleaning / degreasing applications of all mechanical equipment as brakes, chains, gears, bearings, clutches, generators, hand tools, molds, dies, slides, pumps, forklifts, valves, nuts & bolts, pipes, power tools. Safe for use on all metal surfaces, glass, most plastics and ceramics.

Directions for Use (Bulk)

Never use on energized equipment. Do not dilute with any other cleaning agent, water, or mix with any solvent. Apply onto soiled surface and continue dipping / applying / spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying. Use only when completely dry. Test on plastics prior to use for compatibility.

 

Directions for Use (Aerosol)

Never use on energized equipment. Spray using pin-point extension tube onto soiled surface and continue spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Spray starting at the top of the surface and slowly working towards the bottom. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying. Use only when completely dry. Test on plastics prior to use for compatibility.

Caution

Contains flammable solvents. Do not spray near naked flame, hot surfaces, or energized equipment. Use with adequate ventilation.

 

Brand

ASV

ايه اس في

Additional information

Weight 0.55 kg

Reviews

There are no reviews yet.


Be the first to review “ASV CS 81 ODC Free Metal Surfaces & Parts Cleaner 500ml”

Vendor Information

  • ASV Air Duster 45 , 500ml

    0 out of 5
  • WEICON Fast-Metal Minute Adhesive , 24 ml

    0 out of 5
  • SOMAFIX UNIVERSAL SILICONE S250

    0 out of 5
  • HPX SAFETY/SECURITY MARKING TAPE, 50mm*33m – Made in Belgium

    0 out of 5
You've just added this product to the cart: