ASV KL 220 Synthetic Chain Oil For High Temperatures 1Liter
- Reviews (0)
- Support Document
- Vendor Info
- More Products
ASV KL 220 Synthetic Chain Oil for High Temperatures
Non-Carbonizing Synthetic Oil for Lubrication of Chains Operating At High Temperatures
High speed tenter frames in textile industry, glass works, paint booths, automotive assembly lines, varnish curing booths, open chains in industry, steel plants, paper and plywood manufacturing units, ceramic processing plants, latex manufacturing plants, lubrication of all chains, clips, bearings.
Directions for Use
Use as supplied. Never dilute or mix with other oil or grease.
For optimal lubrication and adhesion, clean and degrease the surface of all previous residues, lubricants or contaminants. Apply to clean surface by regular oiling methods i.e., by brushing, spraying, dipping or drop feed oiling mechanisms. Allow time for lubricant to penetrate and excess lubricant to drip off before restarting operations.
For new chains: Thoroughly clean prior to applying this lubricant. It is recommended to keep new chains dipped in the lubricant for 30 minutes to ensure complete penetration to all innermost points. Avoid excessive use. Use as per instructions laid down in manufacturer’s manual. Replace cap after use.
- Vendor: Ahmad Attas
- No ratings found yet!