PATTEX PL 150 Exterior Fix Solvent Technology -380g
باتكس بي ال 150 بوليمار لاصق لجميع المواد ويعمل بكفاءة وسرعة عالية قوي الترابط ومانع للتسرب وقاوم للماء والسوائل
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Ensure surfaces to be bonded are clean and free of dust, grease or oil. Surfaces should not be visibly wet or continuously damp.
Substrates must be stable. Remove the dirt with the appropriate solvent or sand down surfaces and clean afterwards from the dust. Before application, mask off the adjacent area with foil or tape, if necessary
Apply adhesive onto one of the surfaces: 1) In spots in order to smooth uneven surfaces, 2) in wave-like form for higher initial tack with wide surfaces or 3) in straight strands for smaller surfaces. In case of outdoor use, apply vertical strands.
One surface should be porous to ensure a solid, secure bond because solvent has to evaporate. For two non porous substrates apply PL150 in vertical strands so that the solvent has the possibility to evaporate
To ensure proper bond, press firmly so that all surfaces are in contact with adhesive.
-10 to +35 °C
Approx. 10 minutes
Allow to dry overnight to ensure proper adhesion. Bond is fully dry after 48h.
Approx. 300 g/m² with full-surface application
- Vendor: Muhammad Habshi
- No ratings found yet!