Sika AnchorFix-2 Tropical, 300ml

Product Description
Solvent- and styrene free,epoxy acrylate based, two part anchoring adhesive for tropical/hot climate conditions.
Uses As a fast curing anchoring adhesive for all grades of:

•  Rebars / reinforcing steel
•  Threaded rods
•  Bolts and special fastening systems
•  Concrete (in cracked and non-cracked)
•  Solid masonry
•  Steel

Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity:

•  Hard natural stone
•  Solid rock

Characteristics:

•  Fast curing
•  Standard guns can be used
•  Medium to high load capacity
•  ETA Approval available
•  Suitable for cracked concrete
•  LEED Attestation available
•  Non-sag, even overhead
•  Styrene-free
•  Low odour
•  Low wastage