ASV WLG 2 White Lithium Grease 500 ML

0 out of 5

( There are no reviews yet. )

Non staining and provides clean lubrication
High load carrying ability
Reduces wear and friction and prevents fretting corrosion
Increases service life of equipment
Very good adhesion to metal surfaces
Completely water proof
Protects surfaces from corrosion

Exclusive of VAT

SKU: ASV WLG-S5 Category: Lubrication & Multifunctional Oils ART NO:
IMPA CODE:
ISSA CODE:

Add to wishlist

Description

Product Description
ASV
® WLG 2 is a heavy-duty high performance extreme
pressure grease containing white solid lubricants for
providing non-staining clean lubrication for applications
where dark grease contamination cannot be tolerated.
It protects against heavy loads, galling, seizure and contains
solid lubricants and EP additives that enable it to withstand
higher loads and reduce wear and friction. ASV
® WLG 2
resists vibratory shocks and does not break down under
prolonged use.
Suitable for operating temperature ranges from -25°C to
+130°C and does not contain any CFCs or ozone depleting
chemicals.
Applications:

For all gears, chains, bushes, joints, pins, bearings,
mechanical & precision instruments, domestic appliances,
sliding surfaces and similar components where a dark
lubricant cannot be used for reasons of contamination and
transfer of lubricant on to processed component.
Benefits:

 Non staining and provides clean lubrication
 High load carrying ability
 Reduces wear and friction and prevents fretting corrosion
 Increases service life of equipment
 Very good adhesion to metal surfaces
 Completely water proof
 Protects surfaces from corrosion
Directions for Use:

Shake the can vigorously for a couple of minutes before
spraying till the bearing noise from inside the container is
audible. Repeat before every application. Spray onto a clean,
dry and degreased surface in thin light coats. Allow the
solvents to evaporate. Spray from a distance of 20-30 cms.
For cleaning the valve dip-tube after spraying, invert the can
and depress the actuator button for a few short bursts till only
the clear propellant comes out.
Caution:

Contains flammable solvents and propellant. Do not
spray near naked flame, hot surfaces or energized equipment.
Use with adequate ventilation.