PERMATEX COPPER ANTI-SEIZE LUBRICANT (31163) – 453.6g

Description

Permatex Copper Anti-Seize Lubricant

Category: Specialty Lubricants – Anti-Seize

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F (-34°C to 982°C). Provides good electrical conductivity. Meets Mil Spec #907E.

Automobile

Spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, fuel filter fittings, and battery cable connections

DIRECTIONS:

STIR WELL BEFORE USING.

  1. For best results, remove dirt, oil and grease.
  2. Apply Anti-Seize lubricant to parts that require protection.
  3. Wipe away excess lubricant.

Refer to Technical Data Sheet for additional information.

Brand

PERMATEX

بيرماتيكس

Additional information

Filter by Temperature

Extreme High Temperature

Color

Copper

Reviews

There are no reviews yet.


Be the first to review “PERMATEX COPPER ANTI-SEIZE LUBRICANT (31163) – 453.6g”

Vendor Information

  • Vendor: admin
  • Address:
  • No ratings found yet!
  • HPX STRETCH & FUSE – TRANSPARENT 25mm*3M – Made in Belgium

    0 out of 5
  • WEICON PTFE Fluid NSF SPRAY DRY- FILM LUBRICANT 400ML

    0 out of 5
  • ASV El-55 Electro Mechanical, Moisture Removal Spray 500ml

    0 out of 5
  • ASV ASTC Copper & Solid Lubricants Based Antiseize

    0 out of 5

You may also like…

You've just added this product to the cart: