AMBERSIL Adheshive HS 300 -(HIGH STRNGTH ADHESIVE ) 500 ml
عبارة عن مادة لاصقة عالية القوة ، تمت صياغتها بدون كلوريد الميثيلين أو المذيبات المكلورة الأخرى.
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
HS 300 HIGH STRENGTH ADHESIVE
SPRAY ADHESIVE HS 300
is a high strength adhesive, formulated without Methylene Chloride or other chlorinated solvents.
- High strength formulation
- Longer open bond time – allows large areas to be covered before film dries
- Economical, good coverage
- Free from chlorinated solvents
Spray Adhesive HS 300 will provide high-strength bonds in many different areas:
- Chipboard and Concrete
- Insulation Materials
- Canvas and Leather
- Paper, Wood and Cork
- Metal, Plastic and Rubber
Apply an even coating to both surfaces to be bonded from 9” – 12” (25 – 30 cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure. N.B. May affect certain plastics. Always test a small, inconspicuous area before general use. To prevent blockages, invert the can after use and spray to clear the nozzle.
The product may be stored at normal ambient temperatures and has a shelf life of not less than 36 months with correct storage. Aerosols should always be stored below 50OC, away from direct heat and naked flame.
HEALTH AND SAFETY
Health and Safety sheet available separately.
|Filter by Temperature||
- Vendor: Muhammad Habshi
- No ratings found yet!