ASV KL 290 Synthetic Chain Oil For High Temperatures 5 Liter
- Extremely wide service temperature range from
-15 to +225°C - Very good extreme pressure properties enhance load
carrying abilities and reduces frictional wear - Extremely low evaporation rate at high temperatures
- Absolute synthetic formulation benefits in terms of no
carbon or resinous deposit even at high temperatures - Reduces cost related to chain cleaning such as labor,
production loss and downtime - Lower evaporation rate reduces consumption and allows
for extension of lubrication periods thereby cutting down
on lubrication costs
- Description
- Brand
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Description
ASV KL 290 Synthetic Chain Oil For High Temperatures
Non-Carbonizing Synthetic Oil For Lubrication of Chains Operating At High Temperatures
Applications
High speed tenter frames in textile industry, glass works, paint booths, automotive assembly lines, varnish curing booths, open chains in industry, steel plants, paper and plywood manufacturing units, ceramic processing plants, latex manufacturing plants, lubrication of all chains, clips, bearings.
Benefits
Extremely wide service temperature range from
-15 to +225°C
Very good extreme pressure properties enhance load
carrying abilities and reduces frictional wear
Extremely low evaporation rate at high temperatures
Absolute synthetic formulation benefits in terms of no
carbon or resinous deposit even at high temperatures
Reduces cost related to chain cleaning such as labor,
production loss and downtime
Lower evaporation rate reduces consumption and allows
for extension of lubrication periods thereby cutting down
on lubrication costs
Provides superior lubrication and protection even when
subjected to high temperatures and humid conditions
Due to superior lubrication, power requirements are
reduced resulting in both lubricant as well as energy
savings
Cost savings due to reduction of premature wearing
out of parts and replacements are also greatly increased
Good adhesive properties and water resistant
Directions for Use
Use as supplied. Never dilute or mix with other oil or grease. For optimal lubrication and adhesion, clean and degrease the surface of all previous residues, lubricants, or contaminants. Apply to clean surface by regular oiling methods i.e., by brushing, spraying, dipping or drop feed oiling mechanisms. Allow time for lubricant to penetrate and excess lubricant to drip off before restarting operations. For new chains: Thoroughly clean prior to applying this lubricant. It is recommended to keep new chains dipped in the lubricant for 30 minutes to ensure complete penetration to all innermost points. Avoid excessive use. Use as per instructions laid down in manufacturers manual. Replace cap after use.
Brand
ASV
Additional information
| Weight | 1.2 kg |
|---|
Be the first to review “ASV KL 290 Synthetic Chain Oil For High Temperatures 5 Liter”
Vendor Information
- Vendor: Alam Zaib
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.