WEICON FLEX 310M CLASSIC WHITE – 310ML

WEICON Flex 310 M

WEICON Flex 310 M Classic adhesive and sealant is strong, overpaintable (wet in wet), sandable, has outstanding aging stability and good resistance to UV rays. It is resistant to freshwater and salt water and is free of silicone, isocyanate, halogens or solvents.

The product has an ISEGA certificate and can be used as an adhesive in food technology. Flex 310 M Classic is an elastic adhesive on an MS polymer basis and is suitable for the bonding of metals, many plastics, ceramic, wood, glass and stone.

WEICON Flex 310 M Classic can be used in metal construction, tank and apparatus engineering, carriage, vehicle and container construction, ventilation and air conditioning systems, in the electrical industry, yacht and boat construction and in all applications where silicones or products containing silicones are not suitable.

Under the brand WEICON Flex 310 M, a variety of high-quality adhesives and sealants is available.

WEICON Flex 310 M are one-component products on an MS polymer basis. They are used for permanently elastic bonding and sealing of different materials to themselves or among each other.

Typical applications are in the fields of

• Metalworking, tank and apparatus construction
• Car body, vehicle, and freight container construction
• Ventilation and air conditioning
• Electrical industry
• Yacht and ship building
  and in many areas of plastic technology.

High elasticity, excellent adhesion on different materials and a good paintability** – these characteristics offer a variety of applications in industry. In addition, all types of WEICON Flex 310 M are neutral-curing, free of solvents and isocyanates as well as of substances that disturb lacquer wettings, e. g. silicone.

Above listed WEICON one-component adhesives and sealants are free of substances that disturb lacquer wettings, like e.g. silicone. Due to their special formulation, they can be overpainted with suitable paint coating systems (except alkyd resin varnishes). In order to check the suitability, however, tests under praxis conditions must always be carried out. This is necessary because of the different composition and the variety of paint coating systems. The cure speed of the adhesives and sealants is only slightly reduced by a paint coating.