AKFIX MS High Tack Multi Purpose Montage Adhesive,290ml

AKFIX MS High Tack Multi Purpose Montage Adhesive is a MS polymer-based, one component, high quality and professional adhesive with high adhesive strength and initial tack. It is suitable for bonding heavy building materials without the use of clamps and/or fixing tape.

FEATURES & BENEFITS 

High initial grab,
Does not contain solvent, silicone or isocyanate,
Semi-elastic bonding,
Very good UV resistance
Excellent elasticity and very good adhesion strength
Over-paintable with water based paints,
No bubble formation
No shrinkage
Primer less adhesion on many different substrates  (preliminary test recommended)

APPLICATION AREAS

Wall cladding elements and ceiling panels
Sound isolation panels (mineral wool, wood-wool cement & plastic foams)
Thermal isolation panels (PUR, PIR, PS)
Casings and frames in building construction
Wooden and plastic laths, ornaments and frames
Doorsteps, window sills, skirting boards and cover plates
Complete construction elements (such as roofing and facade elements) in frame.

INSTRUCTIONS

Before the application, the tip of the cartridges is cut and a plastic cap is fixed.
The tip of the cap is cut according to the width of the surface and fixed to the  cartridge gun.
Apply the adhesive in strips or dots to the base or on the element to be bonded.   The strips must be applied in vertical rows.
Bring  together  the  parts  to  be  joined  as  quickly  as  possible,  at least within  10  minutes  (this  depends  on  the  temperature  and  relative humidity  level).    The parts can at this stage still be adjusted, but finally it should be pushed down  well over the other or tapped with a rubber hammer.