HY-POXY STEELBOND STEEL PUTTY
- Description
- Brand
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Description
DESCRIPTION:
A two-component epoxy formula highly concentrated with carefully selected steel particles, modified curing agents and special high quality additives to provide maximum strength, durability, and ease of application. STEELBOND will adhere to vertical surfaces and can be machined with standard metalworking tools and equipment.
APPLICATIONS:
Universally used for repairing pipes, tanks, valves, pumps, engine blocks, water jackets, radiators, etc. STEELBOND is a non-shrinking, permanent metallic filler that is widely used for blow holes in castings, building up metal surfaces and for the repair of drill jigs and placement fixtures.
CURING TIME:
At 75°F (24°C) a ½” (12.5mm) layer of HY-POXY® STEELBOND® putty will be hard in approximately 4 hours. FULL cure times are as follows:
TEMPERATURE WORKING TIME FULL CURE TIME
60°F (16°C) 90 Minutes 32 Hours
75°F (24°C) 45 Minutes 16 Hours
90°F (32°C) 25 Minutes 8 Hours
HY-POXY® STEELBOND® will not cure properly below 60°F (16°C).
Brand
HY-POXY
Additional information
| Weight | 1 kg |
|---|---|
| Contains | Silicone |
| Filter by Temperature | High Temperature |
Be the first to review “HY-POXY STEELBOND STEEL PUTTY”
Vendor Information
- Vendor: Muhammad Habshi
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.