LIQUI-MOLY Metal Putty-56g (Made in Germany)

LIQUI-MOLY Metal Putty-56g (Made in Germany)

Exclusive of VAT
Category: ART NO:
Add to Quote


Metal Putty

2-K epoxy Plasticine resin that adheres to all materials. Resistant against saline solution, diluted acids and lyes. Can be ground, sawed and painted over after 3 hours.

Intended use

For repairing cracks in housings and refurbishing damaged tapped holes


Liqui Moly Metal Putty is a firmly adherent, 2-component epoxy resin putty with very high chemical resistance. Liqui Moly Metal Putty is ideally suitable for permanent, quick repairs such as sealing cracks or repairing damaged threaded holes in iron, cast iron and other surfaces. Also suitable for magnesium. After curing, the repaired site can be further processed by milling or grinding etc. and painted over.


  • Outstanding chemical resistance
  • Rapid curing
  • Permanent quick repairs
  • After curing, suitable for machining
  • Can be ground and painted over
  • Cures even under water

   Areas of application

  Liqui Moly Metal Putty is used for sealing cracks in housings, for repairing damaged threaded holes and for stud bolts etc.


To obtain the optimum adhesion, the surfaces should be free from dirt, grease and oil residues. For cleaning, we recommend Cleaner Thinner, Part no 6130. Use a knife to cut off the required length of metal putty from the roll and knead it well

Note: The two components are mixed together by kneading them together and the metal putty begins to cure. Liqui Moly Metal Putty should be processed within 3-4 minutes. After approx. 3 hours, the repaired site can be machined if necessary by milling or grinding or can be painted over.




Additional information



Filter by Temperature

High Temperature


There are no reviews yet.

Be the first to review “LIQUI-MOLY Metal Putty-56g (Made in Germany)”

Vendor Information

  • Vendor: admin
  • Address:
  • No ratings found yet!
You've just added this product to the cart: