>

Liqui-Moly Motor Oil Saver / Leak Stop , 300 ml (Made in Germany)

Description

Motor Oil Saver

Regenerates rubber and plastic engine seals such as shaft seals and valve stem seals and prevents oil stains under the vehicle. Counteracts oil dilution. Reduces engine noise and oil consumption through piston rings and valve guides.

Intended use

Suitable for all commercial motor oils in gasoline and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. Can contents are sufficient for up to 5 l motor oil. Sealing action after 600 – 800 km mileage. Not suitable for motorcycles with wet clutches.

Description

Regenerates rubber and plastic engine seals such as shaft seals and valve stem seals and prevents oil stains under the vehicle. Counteracts oil dilution. Reduces engine noise and oil consumption through piston rings and valve guides.

Properties

  • Prevents smoking
  • Damps engine noise
  • Maintains and regenerates rubber and plastic seals
  • Reduces oil consumption
  • Prevents oil spots and pollution of the environment

Areas of application

Suitable for all commercial motor oils in gasoline and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers.

Application

One 300 ml can of Motor Oil Saver is sufficient up to 5 liters of motor oil. The product can be added at any time. After adding, run the engine until warm. Sealing first takes effect after about 600 – 800 km. To guarantee a lasting effect, add Motor Oil Saver after each oil change.

Comment

Not suitable for use in motorcycles with wet clutches!

Brand

LIQUI MOLY

ليكوي مولي

Additional information

Weight 0.4 kg
Contains

Silicone

Filter by Temperature

High Temperature

Reviews

There are no reviews yet.


Be the first to review “Liqui-Moly Motor Oil Saver / Leak Stop , 300 ml (Made in Germany)”

Vendor Information

  • LIQUI-MOLY Universal-Cleaner Extreme 11 Kg (Made in Germany )

    0 out of 5
  • ROCOL DRY PTFE Spray

    0 out of 5
  • PC-7 PASTE EPOXY

    0 out of 5
  • WEICON WR2 Epoxy Resin

    0 out of 5
You've just added this product to the cart: