weicon lock pen 302-70
Processing
WEICONLOCK is ready for use and should be applied evenly direct
from the bottle/tube with the dispensing tip (avoid direct contact
of dispensing tip with metal). For sealing applications, apply
WEICONLOCK in circular motions on the thread. Assemble and
tighten parts. Do not pour back into the bottle any WEICONLOCK
fluid which had contact with metal; even smallest metal particles
will cause the content of the bottle to cure. In series construction,
the use of manual or automatic applicators is recommended.
- Description
- Brand
- Reviews (0)
- Support documents
- Vendor Info
- More Products
Description
Processing
WEICONLOCK is ready for use and should be applied evenly direct
from the bottle/tube with the dispensing tip (avoid direct contact
of dispensing tip with metal). For sealing applications, apply
WEICONLOCK in circular motions on the thread. Assemble and
tighten parts. Do not pour back into the bottle any WEICONLOCK
fluid which had contact with metal; even smallest metal particles
will cause the content of the bottle to cure. In series construction,
the use of manual or automatic applicators is recommended.
Storage
WEICONLOCK can be stored in the unopened original container
for at least 24 months at room temperature. Keep away from
heat sources and direct sunlight. The air in the bottle/tube keeps
WEICONLOCK liquid.
Safety and health
When using WEICON products, the physical, safety technical,
toxicological and ecological data and regulations in our EC safety
data sheets (www.weicon.com) must be observed.
Brand
WEICON
Be the first to review “weicon lock pen 302-70”
Vendor Information
- Vendor: Muhammad Habshi
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.