Our Brands

AKFIX A60 Electrical Contact Cleaner Spray,200ml

Product Category: 
Cleaner & Degreaser
Stock: 
24.00
Content Size: 
200 
Milli Liter (ml)

1 – DESCRIPTION
AKFIX E60 ELECTRICAL CONTACT SPREY is a product designed to remove flux and other surface
contaminants. The product evaporates quickly from the surface without leaving any residue. It is
designed for cleaning grease, dirt, oil etc. from electric-electronic equipment.
2 – PROPERTIES
Fast cleaning action for removal of flux traces, light oils, finger prints and other contaminants.
Periodic planned application prolongs the life expectancy of components.
Non-conductive and non-corrosive.
Evaporates completely, leaving no residue.
Safe for all metal surfaces, most rubbers, plastics and coatings. It is recommended to be tested
on sensitive plastics, adhesive-mounted or stressed parts.
Convenient to use 360° (upside-down).
3 – APPLICATION AREAS
Calculators
Computers
Digital Equipment
Electronic Ignitions
Navigation Equipment
Printed Circuits
Radars
Radios
Switches and Relays
Circuit breakers
Alarm and signal systems
Terminals
Plugs and sockets
4- INSTRUCTIONS
Akfix before applying electro contact cleaner, disconnect electric devices from the power line and wait
for some minutes until there is no more electrıc tension inside the machine. Spray a sufficient quantity
onto the parts to be cleaned from a distance of 25-30 cm. Electrical Contact Spray evaporates very
quickly and does not leave any residues. Wiping or brushing supports the cleaning effect. Devices should
be switched on only when both propellant and active subtance have evaporated completely.

-+