>

Rust Converter

Rust Converter

A single water-based active chemical (liquid) called “Rust Converter” combines with adherent rust on metal surfaces to create a durable protective coating. The steel won’t rust any more thanks to this coating.
Tannic acid and an organic polymer are the two active elements in rust converters, which are waterbased primers. Rust is made of iron oxide, which tannic acid combines with chemically to create iron tannate, a durable substance that is dark in colour. Tannins are a class of naturally occurring substances that can be obtained from fruits, trees, and grasses and are soluble in water and alcohol.
2-Butoxyethanol, the second active component, is an organic polymer that acts as a primer layer of protection. Rust is transformed into a durable black protective polymeric covering by the total chemical process, which makes it a superb primer for both oil- and epoxy-based paints.
Instructions for Use:
1. When dealing with corroded mild steel or carbon steel surfaces, start by mechanically chipping, wire brushing, or otherwise removing the loose rust scales.
2. Make sure there is no oil, grease, paint, or other material on the area that will be handled with Rust Converter. Use a brush, spray, or dip to effectively apply Rust Converter after that.
3. To guarantee that the Rust Converter reacts completely with the rust, leave the area alone for at least 24 to 48 hours. The surface is then ready for any kind of subsequent coat.

Areas of Typical Application
Drilling rigs, chemical process equipment, and storage tanks, tube and pipe stock, conveyors, cranes, bridges, pipelines, overhead water tanks, heavy structural steel tankers (on land and at sea), concrete reinforcements, automobile dickeys, etc., and essentially all kinds of industries where the issue of iron rust is available. Coverage and Enduring:
Rust Converter has a 25–30 square meter coverage area per litre. Whenever kept in a plastic container that is tightly sealed, it has an endless shelf life. Rust contained in used Rust Converter might cause a chemical reaction in unused Rust Converter, thus never combine used and unused Rust Converter together.

  • Removes Rust Quickly. No heavy wire brushing or sand blasting required.
  • Safe Acid Technology. Not harmful to skin.
  • Non-Corrosive. Safe to use on all metals
  • Non-Flammable.
  • No special equipment is necessary. Parts are simply submerged in the solution.
  • No heavy fumes or bad odors.
  • Zero VOC.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *