AMBERSIL CHAINSPRAY (chain and drive lubricant ) – 400 ml

CHAIN SPRAY FOOD PROCESSING SAFE®CHAIN LUBRICANT WITH PTFE

Description

Chain and drive, heat dissipating lubricant, specifically developed for chain lubrication in conjunction with the manufacturers of the fork lift trucks. Offers maximum adhesion to chain links. Resists water wash off’ and dust absorption and can be applied to running chains. High temperature resistance up to 300°C. Meets military specifications – Def. Stan D/DQA/TS/CS/217/1. Pencil jet spray pattern to facilitate accurate application. Size: 400ml

CHAINSPRAY LUBE

is a foaming chain lubricant with added PTFE. A high performance chain and conveyor lubricant based on stable vegetable oils and PTFE. Chain Lube is specifically designed to provide convenient, effective lubrication and protection in applications where incidental food contact may occur or in applications where a clean lubricant is preferred. The gentle foaming action assures an excellent penetration and prevents against dripping.

FEATURES

•NSF H1 registered (N°137998–400ml & 143144 –5ltr) meets USDA 1998 H1 guidelines for use as a lubricant with incidental food contact

•Formulated using only food grade acceptable components

•Good adhesion on metal surfaces, even at elevated temperatures and high rpm

•Excellent penetration and lubrication properties

•Leaves a tenacious, long lasting lubricant film

•Good load carrying properties

•Resistant to water wash off

•Prevents corrosion

•Operating temperature from -15 °C to+175 °C

•Contains PTFE which helps reduce friction and wear

•Virtually odourless and colourless

•Controlled application with gentle foaming action

•Does not contain nut oils or nut oil derivatives

APPLICATIONS

Lubricant for general and food processing industries:

• Chain drives
• Open gears
• Wire ropes
• Snatch blocks
• Transfer belts
• Overhead door drivers

DIRECTIONS

•Do not mix with other lubricants. Clean parts to be lubricated and allow dry

•Shake can well

•Apply evenly onto the chain, wire rope, etc. and allow product to penetrate and set for a few minutes. Wipe off excess with a cloth

•Do not energise or start high speed/high load equipment before product has penetrated

•Excess or spilled product can be removed with Ambersil Amberklene FG

•Do not use on energised equipment

•Repeat application when necessary

STORAGE

The product may be stored at normal ambient temperatures and has a shelf life of not less than 72months with correct storage. Aerosols should always be stored below 50OC, away from direct heat and naked flame.

HEALTH AND SAFETY

Health and Safety sheet available separately.