>

MAGNAVIS 7HF MPI Ink (black magnetic ink ) – 400 ml (MADE IN UK)

Description

MAGNAVIS 7HF MPI Ink  (black magnetic ink ) – 400 ml

General Description: 
7HF is an oil based ready to use black ink for wet method magnetic particle testing.The ink is used in conjunction with suitable magnetising equipment to locate fine surface and slightly subsurface discontinuities in ferrous materials.

Typical defects found include shrink cracks, welding defects, grinding cracks, quenching cracks and fatigue cracks. 7HF gives clear black indications when viewed in daylight.

Composition:
7HF consists of a suspension of magnetic particles in a high flash petroleum distillate.

Method of Application:
Aerosol spray is the only possible method of application. First, make sure that the inspected surfaces are clean and dry. For permanently magnetized parts, shake can until agitator rattles; cover surface with spray. When using the continuous magnetizing method, fix the part in the magnetizing unit, cover the surface quickly with 7HF Black spray, and immediately magnetize the part.

Components should be cleaned prior to testing to provide a suitable test surface.
The Ink can be applied by spraying, immersion or flooding.
The ink must be mixed thoroughly prior to use and must be kept agitated during testing.

Using the wet continuous method, the ink is applied to all surfaces of the component during magnetisation. The indications will be formed during the application of magnetising current. The flow of ink must stop before the magnetising current otherwise there is a risk that the force of the ink application may wash away indications.

 Using the wet residual method, the premagnetized part is immersed in the bath, removed, allowed to drain and then inspected. This method is generally less sensitive than the continuous method and is more susceptible to rapid particle depletion and bath contamination.
In situations where the test surface colour is dark, a thin coating of a suitable white contrast paint such as Magnaflux WCP-2, may be applied prior to testing to provide a contrasting background.

Clean Up: 
Demagnetize the part, and wipe clean with rags dampened with either water or solvent. Complete removal of 7HF magnetic particle materials will be impossible if the part is not demagnetized.

Due to the classification of these goods as Dangerous for shipping purposes, we will quote carriage charges individually based on quantity and destination.

Typical defects found include shrink cracks, welding defects, grinding cracks, quenching cracks and fatigue cracks. 7HF gives clear black indications when viewed in daylight.

More information here

Brand

MAGNAFLUX

ماقنا فلكس

Additional information

Weight 0.5 kg

Reviews

There are no reviews yet.


Be the first to review “MAGNAVIS 7HF MPI Ink (black magnetic ink ) – 400 ml (MADE IN UK)”

Vendor Information

  • AKFIX C108 PAINT REMOVER Spray 400ml

    0 out of 5
  • SRC Cast-a-Mold Platinum (Food Grade)

    0 out of 5
  • LIQUI-MOLY V-Belt Spray,400 ml (Made In Germany)

    0 out of 5
  • ,

    ASV FM SUPER CLEAN Food Grade Electrical & Mechanical Cleaner 500ml

    0 out of 5
You've just added this product to the cart: