>

ASV RNC 10 Wax Based Corrosion Inhibitor 500ml

ASV RNC 10 Wax Based Corrosion Inhibitor 500ml

  •  Thin dry film provides short term corrosion protection for up
    to 9 months indoor storage conditions
  •  Ultrathin film provides mild lubrication
  •  Stops further rusting
  •  Penetrates into minutest cracks to stop further moisture
    ingress
  •  Removal of the film is not necessary
  •  Does not attract dirt & dust
Exclusive of VAT
SKU: ASV RNC10-S5 Categories: , ART NO:
IMPA CODE:
ISSA CODE:

Description

Product Description
ASV® RNC 10 is a thin dry waxy film type corrosion inhibitor
for providing short-term protection from rust and corrosion
for up to 9 months indoors under normal storage
conditions. It forms a light protective film over the surface
and seals out entry of moisture & corrosion. Its dry nonstaining formulation resists dirt & dust build up and is safe
for use on all metals.
ASV® RNC 10 does not contain any CFCs or any ozone
depleting substances.
Applications
Corrosion Protection for metal parts in storage,
manufacture, shipping or in service as:
 Dies
 Jigs
 Tools
 Molds
 Instruments
 Solenoids
 Welds
 Castings
 Shafts
 Motors
 Spare Parts
 Freshly Machined Surfaces
Benefits
 Thin dry film provides short term corrosion protection for up
to 9 months indoor storage conditions
 Ultrathin film provides mild lubrication
 Stops further rusting
 Penetrates into minutest cracks to stop further moisture
ingress
 Removal of the film is not necessary
 Does not attract dirt & dust
Directions for Use – Bulk
Apply onto clean, dry and degreased surfaces by means of
brush or by dipping components into the fluid. Ensure
removal of rust, loose scales, dirt, dust and trapped moisture
from surfaces before application. Mask areas not required to
be coated. Apply uniformly a light film for maximum
coverage. Two light films are better than a single thick film.
For thicker films, recoat only after previous coat dries. Reuse
as required.
Directions for Use – Aerosol 
Shake can till bearing noise from inside is audible. Spray
liberally, a light and even film onto the surface. Spray on to
clean and degreased surface and remove dirt, rust, scales,
dust and entrapped moisture prior to application of this
product. Allow solvents to evaporate and film to dry before
recoating. Reuse as required.
Caution
Contains flammable propellant and solvents. Do not spray
near naked flame, hot surfaces or energized equipment.
Use with adequate ventilation.

and using for industrial materials and like

 

Brand

ASV

ايه اس في

Additional information

Weight 0.55 kg

Reviews

There are no reviews yet.


Be the first to review “ASV RNC 10 Wax Based Corrosion Inhibitor 500ml”

Vendor Information

  • ASV CP 8 Chuck paste: white solid lubricants based grease paste, 500g

    0 out of 5
  • LOCTITE 406 Instant Adhesive, 20g

    0 out of 5
  • WEICON LOCK PEN SYSTEM AN 305-74, 50ml

    0 out of 5
  • ASV Silicon Lube Food Grade Spray 500ml

    0 out of 5
You've just added this product to the cart: