LIQUI-MOLY Bushing and Bearing Fixation ,10g (Made in Germany)
- Description
- Brand
- Additional information
- Reviews (0)
- Support Document
- Vendor Info
- More Products
Description
Bushing and Bearing Fixation
Solvent-free, high-strength, low viscosity, oil-resistant and anaerobe (without oxygen) hardening glue on a Dimethacrylatester basis. Service temperature: – 60 °C to + 150 °C.
Intended use
For attaching coaxial assembly parts such as bearings, bushings, shafts and hubs as well as for joining plastics and rubber/metal or metal/metal surfaces.
Description
Solvent-free, high-strength, low viscosity, oil-resistant and anaerobe (without oxygen) hardening glue on a Dimethacrylatester basis.
Properties
- High strength
- Outstanding capillary action
- Rresistant to gasoline and brake fluid at room
- Temperature as well as to other materials
- Cures in the absence of oxygen
- Low viscosity
Areas of application
For attaching coaxial assembly parts such as bearings, bushings, shafts and hubs as well as for joining plastics and rubber/metal or metal/metal surfaces.
Application
The components to be bonded must be roughly freed from contaminants such as oil films, dirt, paint or other coating materials to obtain the optimum bond. Wet the bush and bearing mounting with the adhesive and then bring them together.
Comment
Due to the anaerobic properties of the product, you must always ensure that there is enough air in the bottle, otherwise the adhesive could harden prematurely. The bottle should therefore only be filled up to about 1/3. However, the quantity always corresponds to the content indicated on the container!
Brand
LIQUI MOLY
Additional information
| Weight | 0.3 kg |
|---|
Be the first to review “LIQUI-MOLY Bushing and Bearing Fixation ,10g (Made in Germany)”
Vendor Information
- Vendor: Muhammad Habshi
- Address:
- No ratings found yet!
Reviews
There are no reviews yet.