Our Brands

AKFIX MS High Tack Multi Purpose Montage Adhesive,290ml

Product Category: 
MS Polymers
Content Size: 
Milli Liter (ml)

AKFIX MS High Tack Multi Purpose Montage Adhesive is a MS polymer-based, one component, high quality and professional adhesive with high adhesive strength and initial tack. It is suitable for bonding heavy building materials without the use of clamps and/or fixing tape. 
High initial grab, 
Does not contain solvent, silicone or isocyanate,  
Semi-elastic bonding,  
Very good UV resistance 
Excellent elasticity and very good adhesion strength 
Over-paintable with water based paints, 
No bubble formation 
No shrinkage 
Primer less adhesion on many different substrates  (preliminary test recommended)    
Wall cladding elements and ceiling panels  
Sound isolation panels (mineral wool, wood-wool cement & plastic foams)  
Thermal isolation panels (PUR, PIR, PS)  
Casings and frames in building construction  
Wooden and plastic laths, ornaments and frames  
Doorsteps, window sills, skirting boards and cover plates  
Complete construction elements (such as roofing and facade elements) in frame.   
Before the application, the tip of the cartridges is cut and a plastic cap is fixed. 
The tip of the cap is cut according to the width of the surface and fixed to the  cartridge gun. 
Apply the adhesive in strips or dots to the base or on the element to be bonded.   The strips must be applied in vertical rows.  
Bring  together  the  parts  to  be  joined  as  quickly  as  possible,  at least within  10  minutes  (this  depends  on  the  temperature  and  relative humidity  level).    The parts can at this stage still be adjusted, but finally it should be pushed down  well over the other or tapped with a rubber hammer.