>

HY-POXY STEELBOND STEEL PUTTY

Description

DESCRIPTION:

A two-component epoxy formula highly concentrated with carefully selected steel particles, modified curing agents and special high quality additives to provide maximum strength, durability, and ease of application. STEELBOND will adhere to vertical surfaces and can be machined with standard metalworking tools and equipment.

 

APPLICATIONS:

Universally used for repairing pipes, tanks, valves, pumps, engine blocks, water jackets, radiators, etc. STEELBOND is a non-shrinking, permanent metallic filler that is widely used for blow holes in castings, building up metal surfaces and for the repair of drill jigs and placement fixtures.

 

CURING TIME:

At 75°F (24°C) a ½” (12.5mm) layer of HY-POXY® STEELBOND® putty will be hard in approximately 4 hours. FULL cure times are as follows:

TEMPERATURE       WORKING TIME         FULL CURE TIME
60°F (16°C)               90 Minutes                      32 Hours
75°F (24°C)               45 Minutes                      16 Hours
90°F (32°C)               25 Minutes                       8 Hours

HY-POXY® STEELBOND® will not cure properly below 60°F (16°C).

Brand

HY-POXY

هاي بوكسي

Additional information

Weight 1 kg
Contains

Silicone

Filter by Temperature

High Temperature

Reviews

There are no reviews yet.


Be the first to review “HY-POXY STEELBOND STEEL PUTTY”

Vendor Information

  • LOCTITE 243 Primerless, Oil Tolerant, Medium Strength, Removable, Blue Threadlocker

    0 out of 5
  • WEICON LOCK PEN SYSTEM AN 302-42, 50ml

    0 out of 5
  • ASV SS CLEAN 1 Cleaner / Degreaser For Stainless Steel

    0 out of 5
  • PERMATEX NICKEL ANTI-SEIZE Lubricant (77164) – 454 g

    0 out of 5

You may also like…

You've just added this product to the cart: